DLM4100 User’s Manual
P/N 161-09977-001B
11
S10 Carrier Off Disconnect Delay: S10 selects how long carrier must be lost before the modem
disconnects. Note: if S10 is smaller than the value of S9, the modem will not automatically disconnect on
loss of carrier.
Range: 1 to 255
Units: 0.1 Seconds
Default: 14
S11 Tone Dialing Speed: S10 sets the duration and spacing of the dialing tones. S11 does not affect the
pulse dialing rate.
Range: 50 to 255
Units: 1 Millisecond
Default: 95
S12 Escape Code Guard Timer: S12 sets the escape sequence guard timer. If characters are received
before or after the escape sequence, within the guard timer, the modem aborts the escape attempt and
remains in data mode.
Range: 0 to 255
Units: 0.02 Seconds
Default: 50
S14 General Bit-Mapped Options: S14 reflects the state of several “AT” commands.
Bit 0,4,6 not used
Bit 1 0=Echo Disabled (ATE0)
1=Echo Active (ATE1)
Bit 2 0=Send result codes (ATQ0)
1=No result codes (ATQ 1)
Bit 3 0=Numeric result codes (ATV0)
1=Full word result codes (ATV1)
Bit 5 0=Tone dialing selected (T)
1=Pulse dialing selected (P)
Bit 7 0=Answer
1=Originate
S16 Test Status: S16 shows the modem test status.
Bit 0 0=No local analog loopback
1=Local ALB active
Bit 2-7 not used
Commentaires sur ces manuels