Data-Linc Group DLM4100 Guide de l'utilisateur télécharger pdf (Page 14)

DLM4100 User’s Manual

P/N 161-09977-001B

S24 Sleep Mode Timer: S24 sets the length of time in seconds that the modem must be idle before

entering the low power, sleep mode. When S24 is set to 0, sleep mode is disabled.

Range:0 to 255

Units: seconds

Default: 0

S27 Pulse Dialing Bit-Mapped Options: S27 reflects the state of several “AT” commands.

Bit 0 1 3

0 0 0=Normal mode (AT&Q0)

1 0 1=Error control enabled (AT&Q5)

0 1 1=Direct mode (AT&Q6)

Bit 2, 4- 5, 7 Not used

Bit 6 0=CCITT Protocols (ATB0)

1=Bell Protocols (ATB1)

S28 Pulse Dialing Bit-Mapped Options: S28 stores the modem’s pulse dialing configuration.

Bit 0-2, 5-7 Not used

Bit 3-4 0=Make/Break ratio 39%/61%; 10 pulses per second (AT&P0)

1=Make/Break ratio 33%/67%; 10 pulses per second (AT&P1)

2=Make/Break ratio 39%/61%; 20 pulses per second (AT&P2)

3=Make/Break ratio 33%/67%; 20 pulses per second ( AT&P3)

S29 Hook Flash Timer: S29 determines the length of time the modem closes its off-hook relay on receipt

of the “I” dial modifier to simulate a switch hook flash.

Range: 0 to 255

Units: 10 Milliseconds

Default: 70

S30 Disconnect on Inactivity Timer: S30 sets the period the modem is idle before it disconnects. A 0

disables the inactivity timer.

Range: 0 to 255

Units: 10 Seconds

Default: 0

S31 General Bit-Mapped Options: S31 stores the status of various AT commands.

Bit 0 0=No single-line connect messages (AT\V0)

1=Single-line connect messages

Bit 1 0=No auto mode detection (ATN0)

1=Auto mode detection active (ATN1)

Bit 2-3 0=Report host speed (ATW0)

1=Report all parameters (ATW1)

2=Report modem speed only (ATW2)

Bit 4-7 Not used

S32 XON Character: S32 determines the ASCII character to be sent as XON for in-band flow control.

Range: 0 to 255

Units: ASCII Character

Default: 11 (VT)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire

Data-Linc Group DLM4100 Guide de l'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Data-Linc Group DLM4100